Description
10 pcs lot W1209 THERMOSTAT DIGITAL DC12V COOL HEAT TEMP THERMOMETER TEMPERATURE CONTROL ON/OFF SWITCH-50-110C TEMPERATURE CONTROL SWITCH ARDUINO
-
Product description:
- Model: W1209
- Dimensions: 48 * 40mm
- Temperature control mode: ON / OFF
- Temperature range: -50-110
- the resolution, when the temperature is 0.1 the resolution, is -9.9~99.9, other temperature segment is 1
- Control accuracy: 0.1
- Hysteresis accuracy: 0.1
- Refresh rate: 0.5S
- High-temperature protection 0-110
- Supply voltage: for DC 12V
- Static current: ≤ 35MA, attract current ≤ 65MA
- Output voltage: for DC 12V
- Output power: 10A relay
- Measurement input: NTC (10K 0.5%) Waterproof Sensor
- Environmental requirements: -10 ~ 60 Humidity 20% -85%
-50~110C DC 12V Digital LCD Temperature Controller Heat Cool Temp Thermostat Thermometer Regulator + Sensor WKQ001-P3437
Feature:
- Mini size, high-quality temperature controller, Wide temperature measuring range, -50~+110 Degree Centigrade
- With large and clear LED display for better readability
- Multiple functions, such as Heating and Cooling control, Temperature Calibration function, Delay protection function
- All parameters can be set to default setting after short circuit
- Can be used for a domestic freezer, water tanks, refrigerator, industrial chiller, boiler, steamer, industrial equipment and other temperature-controlled systems
Specification:
- Input Voltage: DC 12V
- Control Range: -50~110 Degree Centigrade
Resolution:
- -9.9~99.9 Degree C: 0.1 Degree C
- Else Range: 1 Degree C
- Control Accuracy: 0.1 Degree C
- Temperature Accuracy: 0.2%FS
- Refresh Rate: 0.5s
- Measurement Input: NTC(B3950=10K 0.5%)waterproof sensor (Cable Length: 1 meter)
- Output: Output Switch, Max. 10A
- Environment Requirement: -30~60 Degree C
- Humidity: 20%~85%
Parameter Setting (P0~P8):
-P0Cooling / Heating mode
-P1: Backlash Setting
-P2: Highest Range Setting
-P3: Lowest Range Setting
-P4:Temperature Calibration
-P5:Delay Start Time
-P6:High Temperature Alarm
-P7: Data Lock Switch
-P8: Restore Factory Settings
Size:
- Complete Size: 77 x 35 x 88mm
- Open-pore Size: 70.5 x 29mm
Usage:
Long-press “Set” button for 5 seconds to enter the internal parameter setting, then press Up/Down button to adjust P0~P8, and press “Rst” to Confim & Back.
Reviews
There are no reviews yet.